Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 1, 2011 11:02:19 GMT
I need new silent blocks on the rear suspension arms on Eagle ss. Do you know where 'I can be ordered optionally? Please advise.  Eagle Mk2 model?  Thank you for reply. JB |
|
|
|
Post by Gary on Apr 2, 2011 20:41:05 GMT
|
|
|
|
Post by terryrob on Apr 3, 2011 11:29:04 GMT
I think thats a front set Gary, but the company will probably do the rears as well, I got a set of the original type rubber ones from my local motor factors. I got the heavy duty ones without the voids.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 5, 2011 15:14:36 GMT
thank you for reply
Do not know what the car has the same rear axle
I know it's Cortina (Taunus), but I do not know the year of manufacture ..
JB
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 6, 2011 20:33:06 GMT
thank you for reply Do not know what the car has the same rear axle I know it's Cortina (Taunus), but I do not know the year of manufacture .. JB Ford Cortina Mk3/4/5 1970-1982 all had the same bushes. www.superflex.co.uk/products.php?cat=148&pg=3 |
|
|
|
Post by Peter on Apr 7, 2011 22:12:10 GMT
TIP.
I know this is somewhere on the forum but it's worth repeating.
Getting the old bushes out can be a pig and many have bashed hacked and burnt their way but the easy way is to drill out the rubber and remove the centre sleeve then thread a hacksaw blade through the bush and connect it to the saw then cut the outer sleeve through, remove the saw and the old bush will just tap out.
Installing is a matter of a piece of M10 studding and a couple of thick washers and nuts and just crank it in, (do NOT bash it in).
Several of the members have a set of void bush tools for the Cortina they will lend you, (including me, if you pay the postage).
p.s.
The white SS is a MkIII.
Easy ID is
MKI, long nose but side windows fixed on front edge, separate internal roll bar
MkII, Separate nose, Roll bar separate in early one and built in on late MKIIs and all MKIIIs
MKIII back to one piece nose with slightly larger spoiler but windows fixed front bottom and top as in photo..
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 5, 2011 10:39:15 GMT
Thank you for your help. I'll Mounts manufactured on request.
It's easier.
|
|
