|
|
Post by chrisbailey on Jan 23, 2007 15:46:52 GMT
Hi
I have stripped most of my interior out ready to weld a new drivers side floor pan in, I have now got to take the dash appart and rebuild it, anybody know how to fit door seals to stop them leaking, i have got new seals for every part except when i put them on the keep coming off?
they were glue in place before but this didnt stop them leaking
and does anybody know if the classic seats from midlands wheels fit, before i buy another pair of seats that wont fit?
|
|
|
|
Post by E.O.C. Administrator on Jan 23, 2007 18:57:15 GMT
If you clean the edge of the body with a little thinners then apply some Sikoflex into the channel of the rubber trim (I would get new stuff, I just did, or gently squeeze the steel grippers in the trim together a bit first) and then tap it firmly onto the body with the joint at the centre bottom, (near the catch).
NO, those seats will not fit, ANY sports seat will require at least 20" width ON THE FLOOR, (47cm BASE = 19") +- you will have at best 17.5". and with a fixed back you will need to be under 5'10" as dropped floors will be useless.
As we have said, the best seats for the job are the Bedford Rascal / Suzuki Carry Hi-back recliners. You can get narrow "roadster" seats from both Cobra and Intertrim of Telford that will fit but they are narrow under the legs, fixed back and hard on the arse, Oh yeh, expensive!
|
|
|
|
Post by chrisbailey on Jan 25, 2007 18:07:59 GMT
thats the thing these seats are 17" wide at there widest part, at the runners they are about 14" i was hoping to buy the ones of ebay but the price is out of my leage now, if i never baught my other seats amybe i could have reached them!  |
|
|
|
Post by Peter on Jan 26, 2007 13:24:12 GMT
According to MWS their "classic" seat is 47cm or 18.5" so I have no idea what you have, All I know is that from centre tunnel to chassis rail is 17.5" and if you drop the floors then that's all you have to play with.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 26, 2007 22:54:50 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 3, 2008 21:55:14 GMT
I know this is ancient thread but I have FTO seats in mine and they fit ok.
|
|
