|
Post by neilsmith on Oct 9, 2014 20:33:41 GMT
I am struggling to wire up the wiper motor on my Eagle ss. The build manual tells you to wire it up to a lucas 39710 switch. I don't have one of these switches and can't seem to find what vehicle would be fitted with one. I think that it may be fitted to a bus of some sort. Does anyone know of a similar switch that would work, or how to wire the motor up to the cortina wiper switch that is fitted to my car? I can get the wiper motor to work with a simple rocker switch, But I want the wiper to park correctly.
|
|
|
Post by Peter on Oct 9, 2014 22:08:23 GMT
The parking should be taken care of by the internal switch, there should be a plastic block on the motor with 4 or 5 wires on it, fast, slow, power and earth. If you Google, "Lucas wiper motor switch connections images", you should find yours in there.
|
|
|
Post by neilsmith on Oct 22, 2014 19:53:13 GMT
I have worked out the wiper wiring from the lucas pentagraph wiper motor to a ford cortina 2 position wiper switch.
Wiper motor pin number 1 to earth. wiper motor pin number 2 to pin 31B of cortina wiper switch. wiper motor pin number 3 to pin 53B of cortina wiper switch. wiper motor pin number 4 to pin 54 of cortina wiper switch, and also to a 12 volts feed when ignition switched on. wiper motor pin number 5 to pin 53 of cortina wiper switch.
When wired up in this way the windsceen wiper motor will work correctly and park correctly. The lucas wiper motor on my car has an adjustment that you can rotate to make it park on the left or centre or right of the windscreen.
|
|
|
Post by ian on Dec 12, 2014 19:30:43 GMT
Hi, What is the wiper motor that is fitted to the SS please and the wiper arm. They won't fit my eagle but may just fit my Lambo replica.
|
|